Salient Features:

• Powder Coated Machine is built on two solid plates for long-term trouble-free operation.

• Use of Imported Servo System for high speed and accuracy.

• Use of PLC and MMI, size and count digitally set on MMI.

• Machine stops with an alarm for High Speed, High Voltage, Low Voltage, Overload, Encoder error.

• Isolation Transformer for Servo System.

• Use of Two Servo motors, one for the sealing station, another for the cutter station.

• Use of brake motor to prevent sudden fall of the sealer and cutter.

• Sealer slides in linear bearings.

• Inching mode for sealer and cutter motor.

• Thickness: 18 microns minimum to 125 microns maximum (Gusseted) 300 microns (Flat).

• Use of Two servos in tandem to make sealing strong.

• Optional: Use of Cold Pin for stacking at high speed. Two needle pinholes in each bag 75mm from the top.

• After the count, the machine will stop for the desired time, and the stacked bunch can be picked up during this time.

Optional Attachments:

• Cold Pin Blocking

• Hole Punch

• D Punch

• Carry Bag Sealer